Prod Model: |
OEM |
Markets: |
North America,South America,Eastern Europe,Oceania,Mid East,Eastern Asia,Western Europe |
Report: |
SGS |
Casting Method: |
Thermal Gravity Casting |
Material: |
Cast Steel |
Surface Preparation: |
Sand Blast |
Product Description
Product detail:
This product named support frame, which is used in corn harvester, we choose soluble glass precision casting process as the manufacture process for mass production. This shaft is made out of ZG310-570, this material can provide high strength, hardness and wear resistance.
Investment casting process describing:
We offer customers two types of investment cast processes
Materials that can be used in our investment casting process:
Standard-Spec.No.& Grade | Chemical Composition≤% | Mechanical Properties≥ | NOTE:(1)S,P≤0.04% (2)C,Mn%can also be agreed upon by manufacturer and purchaser. (3)Heat Treat:Normalize(N)+Temper(T) or Quench(Q)+T,selected by Foundry |
GB China | JIS Japan | ASTM U.S.A. | C | Si | Mn | T.S. σb N/mm2 | Y.S. σs N/mm2 | EL δ% | R.A. ψ% |
ZG200-400 | SC420 | A27 60-30 | 0.2 | 0.5 | 0.8 | 400 | 200 | 25 | 40 |
ZG230-450 | SC450 | 65-35 | 0.3 | 0.9 | 450 | 230 | 22 | 32 |
ZG270-500 | SC480 | 70-40 | 0.4 | 500 | 270 | 18 | 25 |
ZG340-640 | SCC3B | A148 80-50 | 0.6 | 0.6 | 640 | 240 | 10 | 18 |
Standard-Spec.No | Chemical Composition% | Mechanical Properties≥ |
GB China | JIS Japan | ASTM(AISI) U.S.A. | C | Si | Mn | Cr | Ni | Others | T.S. σb N/mm2 | Y.S. σs N/mm2 | EL σ% |
ZG1Cr13 | SCSI | CA-15(410) | ≤0.15 | ≤1.50 | ≤1.00 | 11.5-14.0 | ≤1.00 | Mo≤0.05 | 620 | 450 | 16 |
ZG0Cr18Ni9 | SCS13 | CF8(304) | ≤0.08 | ≤2.00 | ≤1.50 | 18.0-21.0 | 8.0-11.0 |
| 440 | 185 | 30 |
ZG1Cr18Ni9 | SCS12 | CF20(302) | ≤0.20 | ≤2.00 | ≤1.50 | 18.0-21.0 | 8.0-11.0 |
| 480 | 205 | 28 |
ZG0Cr18Ni12Mo2Ti | SUS316 | CF-8M(316) | ≤0.08 | ≤1.50 | ≤1.50 | 18.0-21.0 | 9.0-12.0 | Mo 2.0-3.0 Ti0.7 | 490 | 216 | 30 |
ZG0Cr17Ni4Cu4Nb | SUS630 | CB-7Cu 17-4PH | ≤0.07 | ≤1.00 | ≤1.00 | 15.5-17.0 | 3.0-5.0 | Cu2.3-3.0 Nb0.14-0.45 | 980 | 785 | 5 |
ZGMN13-3 | SCMnH2 | A128 B-1 | 0.90-1.30 | 0.30-0.80 | 11.0-14.0 |
|
| S≤0.05, P≤0.08 | 686 |
| 35 |
ZG3Cr18Ni25Si2 | SCH19 | A297 HN | 0.20-0.50 | ≤2.00 | ≤2.00 | 19.0-23.0 | 23.0-27.0 | Mo≤0.50 | 435 | 230 | 8 |
ZG4Cr25Ni20Si2 | SCH22 | A351 HK-40 | 0.35-0.45 | ≤1.75 | ≤1.50 | 23.0-27.0 | 19.0-22.0 |
| 450 | 240 | 10 |
Note:S,P≤0.04% except 13%Mn Steel(ZGM13-3) |
Standard-Spec.No. | Chemical Composition% | Mechanical Properties≥ |
GB China | JIS Japan | ASTM U.S.A | Sn | Zn | Pb | Si | Cu | T.S.σb N/mm2 | Y.S. σ% | EL HBW | Hard ness |
ZCuSn5Pb5Zn5 | BC6 | C83600 | 4.0-6.0 | 4.0-6.0 | 4.0-6.0 |
| Balance | 200 | 90 | 13 | 60 |
ZCuSn10Zn2 | BC3 | C90500 | 9.0-11.0 | 1.0-3.0 |
|
| 240 | 120 | 12 | 70 |
ZCuZn16Si4 | SZBC3 | C87800 |
| Balance |
| 2.5-4.5 | 79.5-81.0 | 390 |
| 20 | 100 |
ZCuZn40Pb2 |
| C85700 |
| 0.5-2.5 |
| 58.0-63.0 | 220 | 120 | 15 | 80 |