| Prod Model: |
DIN 1.2365, H10 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Size Range: |
50-420mm |
| Steel-Making Condition: |
Ef, Ef/Eaf+Lf+Vd, Ef/Eaf+E |
| Delivery Condition: |
Annealed, Quenched + Tempered |
| Surface Condition: |
Black, Grinded, Peeled, Rough Turned, Polished |
| Quality Standard: |
BS En ISO 4957 |
| Type: |
Alloy Steel Bar |
| Standard: |
DIN |
| Application: |
Tool Steel Bar |
| Alloy: |
Alloy |
| Special Use: |
Mold Steel |
| Technique: |
Forged, Rolled |
| Steel Grade: |
High Quality Steel |
| Surface Treatment: |
Black, Grinded, Peeled, Rough Turned, Polished |
Product Description
DIN 1.2365 H10 Hot Work Tool Steel
Similar Grade: DIN 1.2365, H10
Shape: Round, Flat, Square.
Size Range:
| Diameter(mm) | Thickness (mm) | Width (mm) | Length(mm) |
| Round | 50-420 | - | - | 2000-5800 |
| Square | 50-420 | - | - | 2000-5800 |
| flat | - | 20-50 | 80-600 | 2000-5800 |
Steel-making Condition: EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:
Annealed , Quenched + Tempered
Surface Condition:
Black, Grinded, Peeled, Rough turned, Polished
Features:
1.Competitive price
2.Immediate delivery
3.Premium quality
4.Reliable service
5.MOQ: 1 Ton
| Packing details | In seaworthy packing, as your requirement. |
| Delivery details | within 30-50 days |
Chemical Composition:
| Grade | C | Si | Mn | P | S | Cr | Mo | V |
| 1.2365 | 0.35-
0.45 | 0.80-
1.25 | 0.20-
0.70 | 0.030 max | 0.030 max | 3.00-
3.75 | 2.00-
3.00 | 0.25-
0.75 |
Heat Treatment:
FORGING: Heating for forging must be done slowly and uniformly. Soak through at 1900-2000°F, and reheat as often as necessary, stopping work when the temperature drops below 1650°F. After forging cool slowly in lime, mica, dry ashes or furnace. H10 hot work tool steel should always be annealed after forging.
ANNEALING: Heat slowly to 1550-1650°F, hold until the entire mass is heated through, and cool slowly in the furnace (40°F per hour) to about 1000°F, after which the cooling rate may be increased. Suitable precautions must be taken to prevent excessive carburization or decarburization.
SRAIN RELIEVING: stress reliving when desirable to relieve the strains of machining, heat slowly to 1050-1250°F, allow to equalize, and then cool in still air.
HARDENING: Warm slightly before charging into the preheat furnace, which should be operating at about 1400-1500°F. 1.2365 hot work tool steel is a very deep hardening steel, and although oil quenching may be used where maximum hardness is required, air hardening is recommended for most applications. The use of salt bath or controlled atmosphere furnace is desirable to minimize decarburization, and if not available, pack hardening spent pitch temperature employed Annealing is usually in the range of 1800-1900°F.
TEMPERING: Tempering practice may vary with size and application, but is usually performed in the temperature range of maximum secondary hardness or higher double tempering is recommended.
Applications:
Forging dies for steel, mandrels, dies, die holder bolsters and dummy blocks, punches, die inserts, gripper and header dies, hot shears, aluminum die casting dies.
Product Description:
1.2365 Chromium hot work tool steel has excellent resistance to softening at high temperatures. This particular grade is resisitant to thermal fatigue cracking and can be cooled in water for servicing.
Contact Information:
FUSHUN SPECIAL STEEL CO., LTD.
Tel: 89-0731-89903933(CHANGSHA, Office)
Fax: +86-0731-89853933
Mobile: +86-15675829432
Website: www.fushunspecialsteel.com
To expand the international market and get the advantages of markets in Hong Kong, We, FUSHUN SPECIAL STEEL Co., Ltd, were established by Huangshi Chengquan Group in 2014.
Huangshi Chengquan Group consists of the following parts:
Ezhou Liufan Chengquan Forging & Casting Factory, established in 1995, covers an area of 10000 square meters. The production capacity is more than 10000 tons per year.
Foshan Shiyong Tool Steel Sales Co., Ltd. Founded in 1998, covers an area of 3000 square meters, annual inventory of 15000 tons.
Provide with the following services: Saw Cutting, Mold, Machining.
Based on its manufacturing capacity, We, Fushun Special Steel Co., Ltd., are engaged in the import and export of iron alloy steel and other special steel.
Export:
Our own products:
Tool Steel: (carbon tool steel, alloy tool steel, high-speed tool steel),
Die steel: (cold work die steel, hot work die steel, plastic die steel)
And sale: Structural steel(carbon structural steel, alloy structural steel)
Shape: Round, square, flat, heavy thickness plate, heavy wall thickness steel tube.
Stainless steel, Bearing steel, Spring steel, Cold Heading Steel, Forgings
Imports: Ferroalloy (chromium iron, nickel iron, vanadium iron, molybdenum iron, etc. )
To provide high quality services for global customers, We insist in the follow principles:
Best price: Try our best to give the lowest price
Top quality: Fake a penalty ten
Fast delivery: Timely delivery
One stop shop: With 20 year business experience, we know steel sources in China, and we can provide a one stop shop service.
After service: Responsive, quality objection don't shuffle.
